Milestones Fabric Buildings
Designed for Strength and Durability
Setting the Standard for
Quality Materials and Expert Design
Comparable Reasons
Why Our Buildings Meet Your
Requirements: |
|
|
|
|
• |
Made in the USA |
|
|
• |
30' to 300' & Wider x Any Length
Without Interior
Columns
Many competitors cannot
manufacture a building 300'
wide without support
columns. When choosing
The CrossOver Building,
the width, height, length,
leg heights, inside center
height and roof slope are
all determined by the
customer and application
requirements. Again
with no interior support
columns, and no pony walls
to get the
height you
require. |
|
|
• |
Quick to
Deploy, Quick to
Install &
Time to
Occupancy is
Fast! |
|
|
• |
Exclusive 20 Year Warranty,
competitors have a 15 yr
warranty |
|
|
• |
99.999% Lead Free Hot
Dip Galvanization
We hot dip galvanize all our
steel after the welding and
fabrication process is
complete. We are 1 of
2 suppliers in the USA that
do not add lead to the zinc
process. This is an
extremely important point
for practicing "Green
Building", composting,
managing waste, or
recycling. |
|
|
• |
Corrosion Resistant Steel
In the hot dip galvanizing process, the zinc chemically bonds to
our structural steel adding 3.9 mils, which provides the maximum protection against corrosion,
strength and longevity. Our competitors only add .9 mils. In highly caustic environments, like salt
storage, and composting, our buildings are protected with 300% more lead-free zinc. All of our bolts, nuts, and washers are zinc coated and
are sealed with an organic coat to further help seal them from corrosion.
|
|
|
• |
Exclusive Durable Fabric
Cover
HL-13 Keder Covers
are
13 oz/yd˛ polyethylene,
the most weather secure truss-to-cover connection, no
condensation, will not rust or drip, providing more strength
and longevity;
competitors use 10 or 12
oz/yd˛ fabrics.
The thermally non-conductive fabric cover provides a warmer
environment in the winter and a cooler interior during
the summer. It allows a multitude of natural light into
the building which may eliminate the need for artificial
lighting. It blocks heat, and transmits light which
provides a superior interior environment with
unparalleled ambiance and exceptional sound dampening
properties. |
|
|
• |
Quality Building Components
Were designed for tight stacking and easy loading to reduce
shipping costs. Our buildings are also designed with
easy to assemble parts to reduce the installation time
costs, using a quick drop in and bolt style purlin so no
spending time trying to line up holes to place the bolt.
The trusses at the base plates are designed with a
pre-drilled mounting plate to bolt the 2 x 6 wooden curb
rail, making finishing off the bottom of the
building during installation easier and much quicker. |
|
|
• |
100% Maximum Usable Space
Spacious free span interiors without interior supports
or columns; with interior height and sidewall equipment
clearance for easy loading and handling materials.
High clearance and no interior support columns provides an
ability to load and unload materials easily. Delivery
and removal of the materials are quicker, which is
another cost saving benefit. |
|
|
• |
Foundation Options
Options include, but are
not limited to: Earth anchors,
screw piles,
posts, cast-in-place
concrete, and pre-cast concrete blocks. Actual
foundation requirements may
vary depending on local codes, site and soil conditions. |
|
|
• |
Fully Code Compliant
Compliant to the current
IBC Building Code, including compliance to wind and snow
loads specific to the building's location, providing superior
structural integrity. |
|
|
|